Click On The Amazon Banner Below Before You Order Anything From Amazon.
Doing this helps to cover our forum server expenses. This does not effect what you order from Amazon at all. To sum things up, Amazon gives us up to 6% in commission. If you have and ad blocker, click this message to be linked to Amazon. It works the same way. ~Thank you for your support of Upstate4x4.com

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Need to find Molylube #1 for manual hub assembly
08-21-2015, 02:41 AM
Post: #1
Need to find Molylube #1 for manual hub assembly
I'm going to disassemble/reassemble my manual hubs Friday. They are Warn Premiums. The instructions call for "a light coat of molylube #1". I looked online and only found it on Amazon for almost $90 a tube. Does anyone know where I can get a small tube or can for a price that isn't insane? Thanks.
Find all posts by this user
Quote this message in a reply
08-21-2015, 06:48 AM
Post: #2
RE: Need to find Molylube #1 for manual hub assembly
I have some if you need a little. When greasing locking hubs, less is more.

Napa sells it for around $10 a tub. Part number SL3141

Too Many Projects . . .
Find all posts by this user
Quote this message in a reply
08-21-2015, 07:29 AM
Post: #3
RE: Need to find Molylube #1 for manual hub assembly
Harbor Freight also has tubes of it - the CRC brand grease.

Mike
2000 XJ Cherokee - 3.5'' lift / 32'' Tirerecapper Pizza Cutters / Front Locker
Find all posts by this user
Quote this message in a reply
08-21-2015, 11:26 AM
Post: #4
RE: Need to find Molylube #1 for manual hub assembly
Thanks guys! I have a NAPA and a Harbor Freight up here so I'll check them out. Unit bearings arrived this morning, fingers crossed that Johnny Joint rebuild kits get here by the end of the day. If all goes well I'll be on the land Sunday. I'll post an invite if we get her back together in time.
Find all posts by this user
Quote this message in a reply
08-22-2015, 11:11 PM
Post: #5
RE: Need to find Molylube #1 for manual hub assembly
Johnny Joint rebuild kits didn't show up. Looks like it will be mid week before I'm up and running again. On the plus side the ORO Lite-Dot taillights came in Saturday. Down to 3 LED running lights on the driver's side with my original Lite-Dots so it was time for a replacement.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)